Foot Brake

O'Neill Vintage Ford | Ford Model A Parts | Brakes | Foot Brake

Brake drums 1928-31 Front A-1125

Brake drums 1928-31 Front. Excellent quality U.S made cast iron brake drum. Almost a must when redoing your entire brake system. Old original drums should be no less than .130" thick. Made in USA.

Availability: In Stock!

Price:£146.99

Brake drums 1928-31 Rear A-1126

Brake drums 1928-31 Rear. Excellent quality U.S made cast iron brake drum. Almost a must when redoing your entire brake system. Old original drums should be no less than .130" thick. Made in USA.

Availability: In Stock!

Price:£153.99

Reinforcing Bands 1928-31 A-1125-BB

Reinforcing Bands 1928-31. When using old brake drums that have been turned several times these are almost a must. These press over outside of drum to give the worn drum much needed support. Made in USA. .

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£49.50

hydraulic Brake Adapter Rings A-2000

hydraulic Brake Adapter Rings. For using 1939-48 hydraulic brakes on 1928-36 spindles. Large ring centres backing plate on spindle, small ring slides over spindle behind the inner bearing. Price per set.

Availability: In Stock!

Price:£30.00

Front brake roller track 1928-34 A-2011-A

Front brake roller track 1928-34. This kit has the tracks with rivets and the rivet setting tool. One kit does both front wheels. Made in USA.

Availability: In Stock!

Price:£34.00

Rear brake track assembly 1928-34 A-2011-BR

Rear brake track assembly 1928-34. This is all the parts to replace the rear track assy. The cam and cam shaft, plus many of the other parts. Does two wheels. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£150.00

Brake adjusting tool 1928-31 A-2012

Brake adjusting tool 1928-31. Brakes are adjusted at the wheels in relation to how far brake pedal is depressed. This handy tool pushes the brake pedal down to a specific distance so you can adjust each wheel. Top of tool hooks around steering wheel. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£60.00

Brake track mount set 1928-31 A-2013

Brake track mount set 1928-31. The special rivets that hold the brake tracks to the backing plates. Made long enough to use on front or rear. Install these before you paint, since they need to be heated red hot in order to sedge them in place. Made in USA.

Availability: In Stock!

Price:£7.00

Brake Track rivet tool 1928-31 A-2013-T

Brake Track rivet tool 1928-31. The heads of the A-2013 rivet set in the centre of this tool and serves as bucking bar when peening the rivets. Keeps the heads from being damaged. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£3.50

Front backing plate bolt set Full Set 1928-31 A-2011-MB

Front backing plate bolt set Full Set 1928-31. The correct old-style bolts with the shank drilled for cotter pins. Full set will do two wheels. Made in USA.

Availability: In Stock!

Price:£17.50

Front backing plate bolt set Half Set 1928-31 A-2011-HMB

Front backing plate bolt set Half Set 1928-31. The correct old-style bolts with the shank drilled for cotter pins. Half set is for one wheel. Made in USA.

Availability: In Stock!

Price:£11.00

Brake Lining Riveting tool 1926-48. A-2018

Brake Lining Riveting tool 1926-48.. This little anvil clamps in a vice and makes riveting or removing old linings a snap! Kit comes with a punch to knock out old rivets, a tool to sedge new tubular rivets, and a tool to drill and countersink linings.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£42.50

Brake lining Tube rivets A-2018-R

Brake lining Tube rivets. A pack of 80 brass tube style rivets that are used for putting brake linings on. Made in USA.

Availability: In Stock!

Price:£5.50

Brake lining 1928-31 A-2021

Brake lining 1928-31. This lining is the soft woven type with brass wire in the lining. One set will do all four wheels. Complete with rivets (non-asbestos) full set.

Availability: In Stock!

Price:£115.00

Brake lining 1928-32 A-2021-HALF SET

Brake lining 1928-32. This lining is the soft woven type with brass wire in the lining. One full set will do all four wheels. Complete with rivets (non-asbestos)
THIS IS THE HALF SET.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£60.00

Brake shoe roller 1928-34 A-2023

Brake shoe roller 1928-34. A cad plated and heat treated roller. An exact repo. (16 per vehicle required)

Availability: In Stock!

Price:£3.00

Adjusting shaft pins 1928-32 A-2027

Adjusting shaft pins 1928-32. A cad plated pin for the brake adjusting shaft. This is the pin that holds the A-2042 adjusting shaft onto the brake shoe. Made in USA.

Availability: In Stock!

Price:£1.00

Brake spring set 1928-31 A-2035/36

Brake spring set 1928-31. This is the best buy! Set includes all of the springs for service and emergency brakes inside the drum. Made in USA. Price per set.

Availability: In Stock!

Price:£19.99

Brake Adjustment wedge 1928-36 A-2041

Brake Adjustment wedge 1928-36. This is the wedge with the square on the end that sticks through the backing plate so that you can adjust the brakes. Plated and heat treated. Need four. Made in USA.

Availability: In Stock!

Price:£14.50

Brake Adjusting wedge tool 1928-36 A-2041-T

Brake Adjusting wedge tool 1928-36. The tool is made special to slip over the square end of the adjusting wedge for adjusting the brake. Powder coated black!

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£16.00

Brake Wedge Dust cap 1928-36 A-2041-C

Brake Wedge Dust cap 1928-36. When replacing the brake adjust wedges, these are the caps that pop out of the backing plate. Made just like the originals. Made in USA.

Availability: In Stock!

Price:£2.50

$Brake Adjusting wedge tool 1928-36 A-2041-TEX$

Brake Adjusting wedge tool 1928-36 A-2041-TEX

Brake Adjusting wedge tool 1928-36. The tool is made special to slip over the square end of the adjusting wedge for adjusting the brake.
As above but in plain steel finish.

Availability: In Stock!

Price:£12.99

Brake adjusting shaft 1928-34 A-2042

Brake adjusting shaft 1928-34. These are the clevises that mount on the end of the brake shoe and rest against the brake adjusting wedge. Need 8 per car.

Availability: In Stock!

Price:£9.00

Brake Shoe Roller Pins 1928-34 A-2045

Brake Shoe Roller Pins 1928-34. Uses one per brake shoe and holds the A-2023 rollers on. Zinc plated and hardened for longlife. Correct head. Made in USA.

Availability: In Stock!

Price:£1.00

Brake Wedge 1928-31 A-2050

Brake Wedge 1928-31. For the front brakes, this is the piece that the brake operating pin pushes on to actuate the front brakes. Import, but very good quality!

Availability: In Stock!

Price:£29.99

Brake Wedge Stud 1928-31 A-2051

Brake Wedge Stud 1928-31. Special bolt that holds the A-2050 in place at the bottom of the front backing plate. Includes A-2052 washer. Made in USA.

Availability: In Stock!

Price:£11.00

Brake floater kit 1928-31 A-2051-F

Brake floater kit 1928-31. This kit replaces your original A-2051 wedge studs and allows the brake wedge to float which allows the brake shoes to equalize pressure giving better brakes. One kit does both front wheels. Made in USA.

Availability: In Stock!

Price:£39.00

Brake Wedge stud washer 1928-31 A-2052

Brake Wedge stud washer 1928-31. Slips over front brake wedge stud after wedge is on. You will need two of these per car. Made in USA.

Availability: In Stock!

Price:£2.50

Brake Wedge stud mount set 1928-31 A-2051-MB

Brake Wedge stud mount set 1928-31. Two castle nuts and cotter pins for holding the wedge stud in place on the backing plate. One kit does both sides. Made in USA.

Availability: In Stock!

Price:£3.00

Front grease baffle A-2060

Front grease baffle. Goes inside the backing plate. Bolts that hold backing plate to spindles hold this in place. Catches any grease that spins out of the hub and keeps it off of the brake shoes. Made in USA.

Availability: In Stock!

Price:£47.50

Brake Operating pin 1928-31 A-2075

Brake Operating pin 1928-31. The pins that operates the front brake shoes. This pin runs from the brake actuating arm down through the centre of the king pin, and into the front brake wedge. 7.280" long. Made in USA.

Availability: In Stock!

Price:£5.50

Brake Operating pin shims 1928-31 A-2075-SH

Brake Operating pin shims 1928-31. If your pins or the other operating pin components are worn, just use these shims to take up slack! These will adjust the angle of you front brake actuating lever. Pack of 2. Made in USA.

Availability: In Stock!

Price:£1.75

Front brake shafts Right 1928-31 A-2076-B

Front brake shafts Right 1928-31. The shafts that sets horizontally and operates the A-2075 operating pins. Right. Made in USA.

Availability: In Stock!

Price:£39.99

Front brake shafts Left 1928-31 A-2077-B

Front brake shafts Left 1928-31. The shafts that sets horizontally and operates the A-2075 operating pins. Left. Made in USA.

Availability: In Stock!

Price:£40.50

Front shaft bushing 1928-31 A-2082

Front shaft bushing 1928-31. Graphite bushing for the front brake shafts. Need 4. Made in USA.

Availability: In Stock!

Price:£1.75

Front brake lever 1928-31 A-2084

Front brake lever 1928-31. Fastens to the end of the front brake shaft and your front brake rod attaches to it. Forged. Right and left are the same.

Availability: In Stock!

Price:£17.50

Front brake lever pins 1928-31 A-2085

Front brake lever pins 1928-31. The pin that holds the lever that your brake rods hook to on the front end of the shaft. Made in USA.

Availability: In Stock!

Price:£1.75

Brake Dust rings 1928-31 A-2087-S

Brake Dust rings 1928-31. These little dust rings slip over the shaft of the brake camshafts before the levers are slid on. Keeps dirt and grit out of the bushings. 1 set per car. Made in USA.

Availability: In Stock!

Price:£2.50

Brake Camshaft bushing 1928-31 A-2227

Brake Camshaft bushing 1928-31. Used on both the emergency brake and the service brake camshafts in the rear housings. A-2231-A and A-2636-A ride in these bushings. Made in USA.

Availability: In Stock!

Price:£1.75

Brake Camshaft bushing reamer 1928-31 A-2227-R

Brake Camshaft bushing reamer 1928-31. Reams the A-2227 bushings for a perfect fit. This is a quality US made spiral hand reamer, not a cheap import! Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£100.00

Rear brake cam 1928-31 A-2230

Rear brake cam 1928-31. Rides in the brake camshaft and this is what spreads the brake shoes. Made in USA.

Availability: In Stock!

Price:£11.00

Rear brake camshaft 1928-31 A-2231-A

Rear brake camshaft 1928-31. A well machines US made brake camshaft. Made in USA.

Availability: In Stock!

Price:£16.50

Rear brake levers Right 1928-31 A-2235-C

Rear brake levers Right 1928-31. Levers that get pinned to the rear brake camshaft for your brake rod to hook to. Very well made. Mounting pin included! Left is driver's side. Right.

Availability: In Stock!

Price:£23.00

Rear brake levers Left 1928-32 A-2236-C

Rear brake levers Left 1928-32. Levers that get pinned to the rear brake camshaft for your brake rod to hook to. Very well made. Mounting pin included! Left is driver's side. Left.

Availability: In Stock!

Price:£23.00

Brake lever pins 1928-31 A-2238

Brake lever pins 1928-31. Holds the rear brake levers onto the brake camshaft. Made in USA.

Availability: In Stock!

Price:£1.75

Rear wheel Grease Baffle 1928-31 A-2240-B

Rear wheel Grease Baffle 1928-31. Used on the rear wheels of the model A to keep grease off of the brake linings. Mounts under nuts that hold backing plate to axle housing. Made in USA.

Availability: In Stock!

Price:£18.00

Backing plate mount bolts Set: 2 long, 2 short, 4 nuts & 4 cotter pins 1928-34 A-2248/50

Backing plate mount bolts Set: 2 long, 2 short, 4 nuts & 4 cotter pins 1928-34. Special cadium plated bolts and nuts that hold the rear backing plates and the radius rod to the axle housing. This set contains 2 long bolts, 2 short bolts, 4 nuts, and 4 cotter pins. One set does one wheel.

Availability: In Stock!

Price:£21.00

Brake rod Clevis pin Standard Size 1928-31 A-2462

Brake rod Clevis pin Standard Size 1928-31. Fits all of the brake rods. This is the standard size which is 0.310 diameter. If your pins holes are worn, you can drill them out and put in the oversize pins (A-2463) which are 0.340 diameter. Made in USA. Price each.

Availability: In Stock!

Price:£0.75

Brake rod Clevis pin Oversize. 1928-32 A-2463

Brake rod Clevis pin Oversize. 1928-32. Fits all of the brake rods. If your pins holes are worn, you can drill them out and put in these oversize which are 0.340 diameter. Made in USA. Price each.

Availability: In Stock!

Price:£0.75

Brake Pedal to cross shaft rod 1928-31 A-2465-B

Brake Pedal to cross shaft rod 1928-31. The rod that connects the brake pedal to the cross shaft. Made in USA.

Availability: In Stock!

Price:£18.00

Brake rod Clevis Cast 1928-31 A-2466

Brake rod Clevis Cast 1928-31. The fisheye type as used on the service brake rods. Need 4.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£5.50

Brake Cross shaft bushings 1 pc. with woven insert 1928-31 A-2477

Brake Cross shaft bushings 1 pc. with woven insert 1928-31. We have either the split style or the solid style. With the split style, you won't have to take your levers off of the cross shaft to put new bushings on. If the bushings do not fit properly on your shaft, it is best to take ends off and have the shaft built back up. Fits 1928-31. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£23.00

Brake Cross shaft bushings 1 pc. solid bronze 1928-32 A-2477-B

Brake Cross shaft bushings 1 pc. solid bronze 1928-32. We have either the split style or the solid style. With the split style, you won't have to take your levers off of the cross shaft to put new bushings on. If the bushings do not fit properly on your shaft, it is best to take ends off and have the shaft built back up. Fits 1928-31.. Made in USA.

Availability: In Stock!

Price:£7.00

Brake Cross shaft bushings 2pc. split bronze 1928-32 A-2477-BS

Brake Cross shaft bushings 2pc. split bronze 1928-32. We have either the split style or the solid style. With the split style, you won't have to take your levers off of the cross shaft to put new bushings on. If the bushings do not fit properly on your shaft, it is best to take ends off and have the shaft built back up. Fits 1928-31. Made in USA.

Availability: In Stock!

Price:£12.99

Brake Cross shaft repair kit 1928-31 A-2477-RK

Brake Cross shaft repair kit 1928-31. Repairs the brake cross shaft if it is worn where the A-2477 style bushings ride. Kit includes sleeves that are slid over the worn area of the cross shaft and liquid metal to hold them in place, special larger bore bronze bushings, lever pins and instructions. One kit does both sides of the cross shaft. Made in USA.

Availability: In Stock!

Price:£42.50

Brake Cross shaft brackets 1928-31 A-2478/79

Brake Cross shaft brackets 1928-31. The brackets that mount the brake cross shaft to the frame. Powder coated black! 1 set does both sides. Made in USA.

Availability: In Stock!

Price:£14.00

Brake Cross shaft bracket bolts 1928-31 A-2478/79-MB

Brake Cross shaft bracket bolts 1928-31. Drilled bolts with castle nuts and cotter pins for holding the cross shaft brackets to the frame. 1 set does both sides. Made in USA.

Availability: In Stock!

Price:£7.00

Brake Cross shaft rivets 1928-31 A-2485-RI

Brake Cross shaft rivets 1928-31. These rivets hold the arms onto the service brake cross shaft. Made in USA.

Availability: In Stock!

Price:£3.00

Brake rod 1928-31 A-2499-B

Brake rod 1928-31. Made in USA with forged ends. The best you can buy!

Availability: In Stock!

Price:£21.00

Hand Brake Rod 1928-31 A-2864

Hand Brake Rod 1928-31. Made in USA with forged ends. The best you can buy!

Availability: In Stock!

Price:£19.50

Brake rods Service & Emergency Rods 1928-31 A-2499-B2864

Full set of brake rods Service & Emergency Rods 1928-31. Made in USA with forged ends. The best you can buy! 6-rods.

Availability: In Stock!

Price:£125.00

Brake rod lock nut set 1928-31 A-2499-N

Brake rod lock nut set 1928-31. Set of 7 nuts used to lock the clevises in place on the brake rods. Made in USA.

Availability: In Stock!

Price:£1.75

Brake Anti-rattle springs 1928-31 A-2504/2866

Brake Anti-rattle springs 1928-31. The original type falt spring steel anti-rattlers. These bolt to the bracket on the car, and push on the nubs on the brakes rods. Not a cheap import, these are top quality US made! 6 per set.

Availability: In Stock!

Price:£19.99

Brake Anti-rattle springs 1931 A-2504/2866-B

Brake Anti-rattle springs 1931. These do the same job as the flat type A-2504/2866 except these wire style return springs were used from September of 1931 until the end of production. They come with mounting hardware. Works on all years.

Availability: In Stock!

Price:£14.99

Brake Anti-rattle spring mounting set 1928-31 A-2504-MB

Brake Anti-rattle spring mounting set 1928-31. A 12 piece set for mounting both types of anti-rattle springs. 4 bolts, 4 nuts, 4 washers. Made in USA

Availability: In Stock!

Price:£2.50

Brake Boot 1928-31 A-7000-BB

Brake Boot 1928-31. A very nice black rubber boot that fits over the brake lever. Keeps the road dirt from getting in the car.

Availability: In Stock!

Price:£5.50

Brake and gear boots Gear Boot 1928-31 A-7000-GB

Brake and gear boots Gear Boot 1928-31. A very nice black rubber boot that fits over the brake and gear shift levers. Keeps the road dirt from getting in the car.

Availability: In Stock!

Price:£5.50

Brake boot retainer 1928 A-7000-BBR

Brake boot retainer 1928. Used only on the early 28's with the hand brake that came through the sub rail on the left. Made in USA.

Availability: In Stock!

Price:£15.99

O'Neill Vintage Ford | Ford Model A Parts | Brakes | Foot Brake


Home Site Map Terms & Conditions Search Store Top Up a Level Contact UsLogin

Foot Brake

Shopping Basket