Clutch

O'Neill Vintage Ford | Ford Model A Parts | Clutch, Gearbox, Pedals | Clutch

28-48 9" Clutch disc - A-7550

Clutch disc 1928-48. The 9" spring centre type disc. Better than the type Henry used when new.

Availability: In Stock!

Price:£71.00

Clutch release bearing spring 1928-31 A-7562

Clutch release bearing spring 1928-31. The return spring for the throw out bearing. Also, returns the clutch pedal. Made in USA.

Availability: In Stock!

Price:£3.50

28-31 Clutch Pressure Plate A-7563-X

At last, a brand new Model A pressure plate.
No more sending them away for a rebuild.
(Not for multi-plate clutch).

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£139.99

Pressure plate mount set 1928-31 A-7563-MB

Pressure plate mount set 1928-31. Set of 12 bolts and lock washers used to mount the pressure plate to the flywheel. Grade 8. Made in USA.

Availability: In Stock!

Price:£3.99

Throw out hub 1928-31 A-7561-B

Throw out hub 1928-31. The cast hub that the throw-out bearing mounts on.

Availability: In Stock!

Price:£39.00

Clutch Release bearing 1928-48 A-7580

Clutch Release (Throw out) bearing 1928-48. It is a good idea to replace this bearing anytime the clutch is replaced. Permanently lubed. Made in USA.

Availability: In Stock!

Price:£39.99

Pilot/Generator bearing 1928-34 A-7600 / A-10094

Pilot bearing 1928-34. The bearing that is pressed into the flywheel for the transmission shaft to go into. Sealed for long life. (Same bearing as A-10094 Generator Bearing 1928-31. This bearing goes in the pulley end of the generator and was used late in 28 until the end of production. ).

Availability: In Stock!

Price:£11.00

Clutch release shaft 1928-31 A-7510-C

Clutch release shaft 1928-31. 11" long for the later style transmission. Will not work on the early 28 multiple disc style clutch. 0.875 diameter. Made in USA.

Availability: In Stock!

Price:£15.50

Multiple disc clutch release shaft 0.875 dia 1928 A-7510-AR

Multiple disc clutch release shaft 0.875 dia 1928. Very similar to the later style shaft except this one has smaller cross drilled holes and has a key slot in the center for the clutch release fork. Used only on multiple disc clutches. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£39.99

Clutch shaft arm 1928-31 A-7511-C

Clutch shaft arm 1928-31. A replacement style arm for the end of the rod that activates the throw out bearing fork. Originally this was a casting, and quite often the originals get cracked. Made in USA.

Availability: In Stock!

Price:£35.00

Clutch shaft Spring washer 1928-31 A-7512

Clutch shaft Spring washer 1928-31. The spring wave washer that fits between the clutch and the brake pedal on the clutch shaft. Made in USA.

Availability: In Stock!

Price:£1.00

Clutch shaft release pin 1928-31 A-7513

Clutch shaft release pin 1928-31. Two of these pins are needed. One for the clutch fork, and the other for the arm on the end of the shaft. Made in USA.

Availability: In Stock!

Price:£1.00

Clutch shaft release pin with key 1928-29 A-7513-A

Clutch shaft release pin with key 1928-29. A 3/16 diameter pin with the key. This was used from the beginning of production until June of 1929. Made in USA.

Availability: In Stock!

Price:£1.50

Clutch release fork 1928-31 A-7515

Clutch release fork 1928-31. The fork inside the clutch area that pushes against the throw out bearing when the clutch pedal is depressed.

Availability: In Stock!

Price:£32.50

Clutch release fork with key 1928-29 A-7516-A

Clutch release fork with key 1928-29. The keyed clutch shaft was used until June of 1929. 3/16 flat headed tubular rivet with the key. Made in USA.

Availability: In Stock!

Price:£1.75

Clutch inspection plate 1929-31 A-7518-B

Clutch inspection plate 1929-31. Metal plate with slotted mounting holes. This attaches to the clutch housing.

Availability: In Stock!

Price:£19.50

Clutch inspection plate bolts 1928-31 A-7518-MB

Clutch inspection plate bolts 1928-31. Two round headed machine screws and lock washers to hold the inspection plate on top of the bell housing. Made in USA.

Availability: In Stock!

Price:£1.75

Clutch Adjusting arm & trunion 1928-31 A-7521/22

Clutch Adjusting arm & trunion 1928-31. Attaches to the clutch pedal and the clutch release shaft arm. This is the little guy that adjusts the clutch. 3/8-24 thread. Made in USA.

Availability: In Stock!

Price:£15.00

Clutch adjuster 1928-31 A-7523

Clutch adjuster 1928-31. Replaces the stock adjusting arm and trunion. To adjust the clutch, simply back off the jam nut and turn the hex in the middle of the stud. Half of the stud is a left hand thread, the other half is right hand thread. Eliminates having to pull the cotter pin and clevis pin to make adjustments. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£45.00

Align tool 1928-31 A-7550-T

Align tool 1928-31. When putting a new clutch disc in your car, this handy little tool aligns the disc with the pilot bearing and makes the job a lot quicker! Made in USA.

Availability: In Stock!

Price:£7.00

O'Neill Vintage Ford | Ford Model A Parts | Clutch, Gearbox, Pedals | Clutch


Home Site Map Terms & Conditions Search Store Top Up a Level Contact UsLogin

Clutch

Shopping Basket