O'Neill Vintage Ford  
 
 

Product PagesFord Model A Parts
Early Ford V8 Parts
Stromberg CarburetorBrooklin model cars
Vintage Deuce Series
Steiff Teddy BearsBooks & Magazines
DVD's
Posters & CalendarsCustom HandbagsSoda BeltsCD & Photo Holder's

Main PagesHomeAbout Dave O'NeillFord Model A HistoryFord Model A Body StylesContact Us


Best Sellers

Safety Fuse kit 1928-34 A-11450-SF

Safety Fuse kit 1928-34 A-11450-SF

£19.99

Every Model A should have one of these! Safety Fuse ...
find out more

Model A Ford Mechanics Handbook Vol 1

Model A Ford Mechanics Handbook Vol 1

£45.00

Now Signed by the author for us! A 'Must Have' ...
find out more

Black radiator hoses 1928-29 A-8260/86-AB

Black radiator hoses 1928-29 A-8260/86-AB

£20.99

Black radiator hoses 1928-29. Made just like the old originals. ...
find out more

Model A Ford Troubleshooting & Diagnostics

Model A Ford Troubleshooting & Diagnostics

£30.00

Model A Ford Troubleshooting & Diagnostics The third book by ...
find out more

Rear main janitor 1928-31 A-6768

Rear main janitor 1928-31 A-6768

£35.00

Fed up with those drips of oil from the rear ...
find out more


Distributor

O'Neill Vintage Ford | Ford Model A Parts | Ignition System |  Distributor

Electronic Ignition kit 1928-31 A-11574 Electronic Ignition kit 1928-31 A-11574

Electronic Ignition kit 1928-31. No maintenance, increased spark energy, major uniformity in spark energy & ignition timing plus increased reliability and life! This results in a smoother & more powerful running engine! Immune to oil, water and HEAT! This kit wil work on 6 & 12 volt systems with positive or negative ground. Nu-Rex brand! Made in USA.

Availability: In Stock!

Price:£350.00

Electronic Ignition Module 1928-31 A-11574-XMElectronic Ignition Module 1928-31 A-11574-XM

Electronic Ignition Module 1928-31. You must already have a Nu-Rex brand ignition to use this. This is the module only. Some people like to carry a spare in case something goes bad. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£211.00

Distributor (New) 1928-31 As Original A-12100Distributor (New) 1928-31 As Original A-12100

Distributor (New) 1928-31 As Original. A brand new distributor for your model A. No exchange needed! They are constructed with all new component pieces. Available as original or with the modern style upper plate. They come with the cam, rotor and lower shaft which are not pictured above. Upper shaft is the drilled style!

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£175.00

Distributor (New) 1928-31 Modern Plate A-12100-MDistributor (New) 1928-31 Modern Plate A-12100-M

Distributor (New) 1928-31 Modern Plate. A brand new distributor for your model A. No exchange needed! They are constructed with all new component pieces. Available as original or with the modern style upper plate. They come with the cam, rotor and lower shaft which are not pictured above. Upper shaft is the drilled style!

Availability: In Stock!

Price:£175.00

Distributor Body 1928-34 Steel Inserts A-12105Distributor Body 1928-34 Steel Inserts A-12105

Distributor Body 1928-34 with steel inserts for the four cylinder engine. The brass is not original but is more corrosion resistant. The body with the brass inserts is U.S. Made but the steel inserted body is an import. However the steelinserted type is an exact copy of the original and is accurately machined where it mates to the distributor casting.

Availability: In Stock!

Price:£29.99

Distributor Body 1928-34 Brass Inserts A-12105-BDistributor Body 1928-34 Brass Inserts A-12105-B

Distributor Body 1928-34 with brass inserts for the four cylinder engine. The brass is not original but is more corrosion resistant. The body with the brass inserts is U.S. Made but the steel inserted body is an import. However the steelinserted type is an exact copy of the original and is accurately machined where it mates to the distributor casting.

Availability: In Stock!

Price:£29.99

Modern Distributor Cap set 1928-34 A-12105-MModern Distributor Cap set 1928-34 A-12105-M

Modern Distributor Cap set 1928-34. Modern cap with plug wires and wire boots. Fits directly in place of the original distributor cap. This set up is beneficial if you are running a CB or radio in your model A because it gets rid of ignition noise that is normally transmitted from the open plug connectors. Made in USA.

Availability: In Stock!

Price:£39.99

Modern Distributor Cap. Cap Only A-12105-MCModern Distributor Cap. Cap Only A-12105-MC

Modern Distributor Cap. Cap Only. Modern cap with plug wires and wire boots. Fits directly in place of the original distributor cap. This set up is beneficial if you are running a CB or radio in your model A because it gets rid of ignition noise that is normally transmitted from the open plug connectors. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£23.00

Distributor Cap 1928-34 A-12115Distributor Cap 1928-34 A-12115

Distributor Cap 1928-34. Sets on top of the distributor body and is what the coil wire plugs into. Made in USA.

Availability: In Stock!

Price:£6.00

Polarity Tester 1928-31 A-12116Polarity Tester 1928-31 A-12116

Polarity Tester 1928-31. Simply place this unit between the distributor cap and the coil wire, and it indicates if you have the wires on your coil properly as well as if you have spark or not. Coms with comlete usage instructions. 'Genuine Ne-Rex'. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£40.50

Spark Tester 1928-31 A-12117Spark Tester 1928-31 A-12117

Spark Tester 1928-31. Mounts between distributor cap and coil wire to test ignitio voltage. Lets you know if your ignition is putting out the proper voltage. This unit will also clear and start flooded engines. Comes with instructions. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£32.00

Ignition Tester 1909-31 A-12118Ignition Tester 1909-31 A-12118

Ignition Tester 1909-31. This handy tool is great for checking to see if you have spark. With the car running, just hold against the spark plug to see if you are getting spark to the plug. Works on T's and A's. Can also be used to see if model T coils are putting out. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£19.50

Modern Distributor rebuild Kit 1928-31 A-12127-RKMModern Distributor rebuild Kit 1928-31 A-12127-RKM

Modern Distributor rebuild Kit 1928-31. Everything you need to rebuild your old distributor modern style. Just like our regular kit except this one has the NU-REX modern upper plate and the long-wire style lower plate. Upper shaft is the drilled version. Made in USA.

Availability: In Stock!

Price:£109.00

Distributor rebuild Kit 1928-31 A-12127-RK Distributor rebuild Kit 1928-31 A-12127-RK

Distributor rebuild Kit 1928-31. Everything you need to rebuild your old distributor housing. The kit includes everything. Kit includes drilled upper shaft! Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£105.00

Distributor Hardware Kit 1928-31 A-12127-MBDistributor Hardware Kit 1928-31 A-12127-MB

Distributor Hardware Kit 1928-31. All screws, rivets and insulators required for rebuilding a distributor. Made in USA.

Availability: In Stock!

Price:£7.50

Distributor Screw & Lock Nut 1928-31 A-12127-LDistributor Screw & Lock Nut 1928-31 A-12127-L

Distributor Screw & Lock Nut 1928-31. Screws into the side of the head to hold distributor in place. Made in USA.

Availability: In Stock!

Price:£3.50

Distributor Heat Shield 1928-31 Unpolished A-12127Distributor Heat Shield 1928-31 Unpolished A-12127

Distributor Heat Shield 1928-31 Unpolished. Clamps on head with head stud nuts. Keeps manifold heat from distributor, and helps to prevent condenser from burning out. They are nade out of stainless steel. Made in USA.

Availability: In Stock!

Price:£7.50

Distributor Heat Shield 1928-31 Polished A-12127-HPDistributor Heat Shield 1928-31 Polished A-12127-HP

Distributor Heat Shield 1928-31 Polished. Clamps on head with head stud nuts. Keeps manifold heat from distributor, and helps to prevent condenser from burning out. They are nade out of stainless steel. Made in USA.

Availability: In Stock!

Price:£15.00

Distributor Index Pin 1928-31 A-12128Distributor Index Pin 1928-31 A-12128

Distributor Index Pin 1928-31. Sticks ou the bottom of the distributor to locate the distributor on the head. Made in USA.

Availability: In Stock!

Price:£1.75

distributor Puller 1928-31 A-12130-DPdistributor Puller 1928-31 A-12130-DP

distributor Puller 1928-31. Safely pulls the distributor from the head without the risk of breaking the distributor casting. Made in USA

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£59.00

Distributor Housing 1928-31 A-12130-HDistributor Housing 1928-31 A-12130-H

Distributor Housing 1928-31. A brand new casting with index pins installed, new bushings installed and reamed. You do the rest.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£100.00

Distributor Bushing set 1928-32 A-12132Distributor Bushing set 1928-32 A-12132

Distributor Bushing set 1928-32. Press into distributor for shaft to ride in. Correct 1" length. Made in USA.

Availability: In Stock!

Price:£3.50

Distributor Bushing Reamer 1928-31 A-12132-RDistributor Bushing Reamer 1928-31 A-12132-R

Distributor Bushing Reamer 1928-31. A quality U.S. Made spiral piloting reamer. Aligns both bushings while reaming. Not a cheap adjustable import reamer! Made in USA.

Availability: In Stock!

Price:£85.00

Distributor Oiler 1928-31 A-12135Distributor Oiler 1928-31 A-12135

Distributor Oiler 1928-31. The spring loaded nickel plated press in oiler for the distributor. You always wondered what that hole was in the side of the distributor. Made in USA.

Availability: In Stock!

Price:£5.50

Distributor Plate Spring 1928-31 A-12137Distributor Plate Spring 1928-31 A-12137

Distributor Plate Spring 1928-31. The spring fitting between the upper and lower plate. Made in USA.

Availability: In Stock!

Price:£1.75

Distributor Clamps 1928-31 A-12144-SDistributor Clamps 1928-31 A-12144-S

Distributor Clamps 1928-31. The spring clips that hold the body onto the distributor housing. Set includes brass rivets. Made in USA.

Availability: In Stock!

Price:£9.99

Distributor Clamp Rivets 1928-31 A-12145Distributor Clamp Rivets 1928-31 A-12145

Distributor Clamp Rivets 1928-31. Brass rivets for holding the distributor clamps to the distributor. Made in USA.

Availability: In Stock!

Price:£1.75

Distributor Lower Plate 1928-31 A-12148-XDistributor Lower Plate 1928-31 A-12148-X

Distributor Lower Plate 1928-31. We make our lower plate assembly just like the original except we use a longer and modern wire. The wire makes a loop before going up to the points which takes the strain off the wire when the spark is advanced or retarded. Made in USA.

Availability: In Stock!

Price:£12.99

Distributor Wire 1928-31 A-12148-WDistributor Wire 1928-31 A-12148-W

Distributor Wire 1928-31. The wire only for the lower plate. Connector is soldered for good contact. This is the long style like we use on A-12148-X. Made in USA.

Availability: In Stock!

Price:£3.50

Distributor Wireless Lower Plate 1928-31 A-12148-WLDistributor Wireless Lower Plate 1928-31 A-12148-WL

Distributor Wireless Lower Plate 1928-31. By installing this modified lower plate, you will eliminate the need for the wire that runs from the points which was not one of Fords "Better Ideas". It uses a brass contact ring, and gives you a brass contact that attaches to the point stud. If you are using this with a modern upper plate, you will also need part number A-12148-WLM. Made in USA.

Availability: In Stock!

Price:£20.50

Distributor Modern plate adapter 1928-31 A-12148-WLMDistributor Modern plate adapter 1928-31 A-12148-WLM

Distributor Modern plate adapter 1928-31. This piece is required when using a modern upper distributor plate with a wireless lower plate. Only works with the type of wireless lower plate like we show. Adapter attaches with no modifications. Made in USA.

Availability: In Stock!

Price:£3.50

Modern upper distributor plate 1928-31 A-12151-CModern upper distributor plate 1928-31 A-12151-C

Modern upper distributor plate 1928-31. This upper plate is modified with modern Ford points and condenser. Both can easily be replaced without even removing the plate. Gets the condenser away from the extreme manifold heat, and eliminates re-timing when you have to change points. Made in USA. "Genuine Nu-Rex".

Availability: In Stock!

Price:£34.99

Upper distributor plate 1928-31 A-12151-PUpper distributor plate 1928-31 A-12151-P

Upper distributor plate 1928-31. An A-1 reprpduction of the upper plate. made in USA. Authentic in every detail down to the SP stamp.

Availability: In Stock!

Price:£10.00

distributor Points block 1928-31 A-12160distributor Points block 1928-31 A-12160

distributor Points block 1928-31. The block that holds the adjustable half of the points. This piece is not included in a new upper plate. Excellent reproduction. Not used with modern upper plate. Made in USA.

Availability: In Stock!

Price:£7.00

distributor Upper shaft 1928-31 A-12178-Sdistributor Upper shaft 1928-31 A-12178-S

distributor Upper shaft 1928-31. The short upper shaft that fits into the distributor housing. Our shafts are the best you'll find! All 1 piece with the shoulder machined right on the shaft. Ground for exact tolerance from top to bottom. Made in USA.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£14.00

distributor Drilled upper shaft 1928-31 A-12178-SDdistributor Drilled upper shaft 1928-31 A-12178-SD

distributor Drilled upper shaft 1928-31. The same excellent quality as our A-12178-S except we have drilled the top of the shaft so you can oil the bushings by simply lifting the rotor and dropping oil through the center of the cam screw. Comes with cam screw and washer. Made in USA.

Availability: In Stock!

Price:£18.00

distributor Thrust washers 0.015 Thick Steel A-12180distributor Thrust washers 0.015 Thick Steel A-12180

distributor Thrust washers 0.015 Thick Steel. Steel washer goes between shoulder on upper shaft and top of distributor housing. Can also be used to take up play between the shaft sleeve and bottom of distributor housing. Fibre washer goes between the shaft sleeve and bottom of distributor housing. Made in USA.

Availability: In Stock!

Price:£1.00

distributor Thrust washers 0.045 Thick Fibre A-12181distributor Thrust washers 0.045 Thick Fibre A-12181

distributor Thrust washers 0.045 Thick Fibre. Steel washer goes between shoulder on upper shaft and top of distributor housing. Can also be used to take up play between the shaft sleeve and bottom of distributor housing. Fibre washer goes between the shaft sleeve and bottom of distributor housing. Made in USA.

Availability: In Stock!

Price:£1.00

distributor Sleeve 1928-31 A-12195distributor Sleeve 1928-31 A-12195

distributor Sleeve 1928-31. This sleeve is pinned on the upper shaft at the base of the distributor to hold the shaft in place. Includes a pin. Made in USA.

Availability: In Stock!

Price:£3.00

Distributor shaft pin 1928-31 A-12196Distributor shaft pin 1928-31 A-12196

Distributor shaft pin 1928-31. The pin that holds the sleeve onto the upper shaft. Made in USA.

Availability: In Stock!

Price:£1.00

distributor Points washer 1928-31 A-12199-Wdistributor Points washer 1928-31 A-12199-W

distributor Points washer 1928-31. Goes under wire terminal on lower plate wire where it attaches to points. Keeps terminal from shorting out on plate. Made in USA.

Availability: In Stock!

Price:£1.00

Modern plate distributor points A-12199-MPModern plate distributor points A-12199-MP

Modern plate distributor points. Replacement points for the modern style upper distributor plate.

Availability: In Stock!

Price:£10.99

Modern plate distributor points A-12151CPTModern plate distributor points A-12151CPT

Modern plate distributor points. Replacement points for the modern style upper distributor plate.
Some people prefer this type with the circlip holding the main post.


Availability: In Stock!

Price:£9.99

Distributor points 1928-31 A-12199Distributor points 1928-31 A-12199

Distributor points 1928-31. Points for the model A distributor. Comes complete with the contact that mounts in the point block.

Availability: In Stock!

Price:£14.99

Distributor Points 32-34 B-12199Distributor Points 32-34 B-12199


Distributor points for the 1932-34 4 cylinder distributor.


Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price:£29.99

distributor Points mounting kit 1928-31 A-12199-MBdistributor Points mounting kit 1928-31 A-12199-MB

distributor Points mounting kit 1928-31. For the original style points onlt. Kit contains special thick steel washer, thin insulating washer and hex nut.

Availability: In Stock!

Price:£1.75

Rotor arm 1928-34 A-12200Rotor arm 1928-34 A-12200

Rotor arm 1928-34 for the distributor on the 4 cylinder engine. Made in USA.


Availability: In Stock!

Price:£4.99

Distributor cam 1928-31 A-12210Distributor cam 1928-31 A-12210

Distributor cam 1928-31. An excellent quality cam that has been carefully machined so timing is right on the money! Made in USA.

Availability: In Stock!

Price:£24.00

Distributor cam wrench 1928-31 A-12210-CWDistributor cam wrench 1928-31 A-12210-CW

Distributor cam wrench 1928-31. Slips over top of cam to hold it firmly in place while screwing or unscrewing the cam screw. For a perfect timing setting! Made in USA.

Availability: In Stock!

Price:£3.00

Distributor cam wrench 1928-31 A-12210-CXDistributor cam wrench 1928-31 A-12210-CX

New style Distributor cam wrench 1928-31. Manufactured by Nu-Rex, this handy tool makes timing the Model A a breeze! Simply insert your timing pin and rotate the cam using this wrench until it rests against the specified contact on the distributor...


Availability: In Stock!

Price:£13.99

distributor Cam screw and washer 1928-31 A-12211/13distributor Cam screw and washer 1928-31 A-12211/13

distributor Cam screw and washer 1928-31. The special screw and washer that hold the cam to the shaft. Made in USA.

Availability: In Stock!

Price:£3.00

distributor Lower shaft 1928-31 A-12249distributor Lower shaft 1928-31 A-12249

distributor Lower shaft 1928-31. For the 2-piece style shaft, this is the shaft that runs from the upper shaft to the oil pump drive gear. Made in USA.

Availability: In Stock!

Price:£4.99

Spark Plug connectors 1928-31 A-12275Spark Plug connectors 1928-31 A-12275

Spark Plug connectors 1928-31. The brass strips that run from the spark plugs to the distributor body. Set of 4. Made in USA.

Availability: In Stock!

Price:£3.00

Modern plate distributor condenser A-12300-MPModern plate distributor condenser A-12300-MP

Modern plate distributor condenser. Replacement condenser for the modern style upper distributor plate.

Availability: In Stock!

Price:£9.00

Short-proof condenser 1928-31 A-12300-SPShort-proof condenser 1928-31 A-12300-SP

Short-proof condenser 1928-31. This condenser won't short out like ordinary condensers do. Much more reliable than a standard condenser! Made in USA.

Availability: In Stock!

Price:£8.99

Model B Condenser B-12300Model B Condenser B-12300


Condenser for the 32-34 4 cylinder distributor.


Availability: In Stock!

Price:£15.50

Condenser screw A-12300-MSCondenser screw A-12300-MS

Condenser screw. The copper 10/32 screw and fibre washer used to attach the condenser to the tab of the lower plate. Made in USA.

Availability: In Stock!

Price:£1.00

Condenser washer A-12300-WCondenser washer A-12300-W

Condenser washer. The copper 10/32 screw and fibre washer used to attach the condenser to the tab of the lower plate. Made in USA.

Availability: In Stock!

Price:£1.00

O'Neill Vintage Ford | Ford Model A Parts | Ignition System |  Distributor

 

Steiff | Boyds | Deans | Charlie Bears | Hermann | Clemens | Deb Canham | Robin Rive | Links | Site Map | About Us

Archers of Ashby | Go Leicestershire | Where did teddy get his name? | Woodlander of Ashby
Teddy Bears | Ashby Bears | Old Ford Parts | The 50's American Diner | American Auto Mags



All contents © O'Neill Group 2010

Contact Us | Privacy Policy | Terms & Conditions

Shopping Basket

Items:, Value:

Checkout Basket




New Products

The Ins and outs of Early Ford Transmisions - Book

The Ins and outs of Early Ford Transmisions - Book

£34.99

A comprehensive service and repair manual covering the three speed transmissions ...
find out more

The Early Years of Ford in America

The Early Years of Ford in America

£19.99

The Early Years of Ford in America is a compilation ...
find out more

Milkcow Magazine August 2010

Milkcow Magazine August 2010

£3.25

The complete 1940s & 1950s lifestyle and culture magazine for ...
find out more

Distributor cam wrench 1928-31 A-12210-CX

Distributor cam wrench 1928-31 A-12210-CX

£13.99

New style Distributor cam wrench 1928-31. Manufactured by Nu-Rex, this ...
find out more

Shorter Pitman Arm LHD 1928-31 A-3590-S

Shorter Pitman Arm LHD 1928-31 A-3590-S

£49.99

A Great new product. Ease that heavy steering with ...
find out more

Hood Prop Kit A-16608-X

Hood Prop Kit A-16608-X

£14.99

At last, an alternative to the bulky hood prop kit ...
find out more